Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Modelo: HY2500
Marca: Qiuxue
Lugar De Origen: porcelana
Tipos De: Resina sintética y plásticos
RELATED VISCOSITY: 2.45
Color: Raw White
Packing: 25kgs Or 800kgs Jumbo Bag
Paquete: La capa interna es aluminio y la capa externa es PP o Bolsas Kraft.
productividad: 30000 TONS PER MONTY
transporte: Ocean,Land,Air
Lugar de origen: PORCELANA
Apoyo sobre: 350,000 TONS PER YEAR
Certificados : ISO9000,ISO14001
HS-Code: 390810
Hafen: SHANGHAI,TAICANG,ZHANGJIAGANG
Tipo de Pago: L/C,T/T,D/P
Incoterm: FOB,CFR,CIF,EXW
Debido a que Nylon PA6 es fácil de absorber la humedad, se debe prestar atención especial al secado antes del procesamiento. Si el material de nylon 66 se suministra en un paquete de material impermeable, el dispositivo debe permanecer sellado. Si la humedad es mayor al 0.2%, se recomienda secar en aire caliente por encima de 80 ° C durante 16 horas. Si el material de nylon está expuesto al aire durante más de 8 horas, se recomienda secar al vacío a 105 ° C durante más de 8 horas.
Temperatura de fusión:
230-280 ° C, 250-280 ° C para variedades mejoradas.
Temperatura del molde:
80-90 ℃, la temperatura del moho afecta significativamente la cristalinidad, y la cristalinidad afecta las propiedades mecánicas de las partes de plástico. Cristalización de componentes estructurales
El grado de temperatura es importante, por lo que la temperatura del moho recomendada es de 80-90 ° C. También se recomiendan temperaturas de moho más altas para piezas de plástico de larga duración y paredes delgadas. Aumentar
Las temperaturas de moho más altas pueden aumentar la resistencia y la rigidez de las piezas de plástico, pero reducir la tenacidad. Si el grosor de la pared es mayor de 3 mm, se recomienda usar una temperatura baja de 20-40 ℃
moho. Para los materiales de nylon 6 de poliamida, la temperatura del molde debe estar por encima de 80 ° C.
NO |
ITEM |
NORM |
DATA |
1 |
VISCOSITY |
Q/321200WLB001—2019 |
M±0.04 |
2 |
MONOMER CONTENT(% ) |
Q/321200WLB001—2019 |
≤0.6 |
3 |
MOISTURE CONTENT(% ) |
Q/321200WLB001—2019 |
≤0.06 |
4 |
AMINE END GROUPS(Meg/kg) |
Q/321200WLB001—2019 |
40±3 |
PRODUCTOS POR GRUPO : Nylon 6 chips > Nylon 6 chips semi aburrido
LAS CHIPS BRIGHT NYLON6 SE UTILIZAN AMPLIAMENTE EN INGENIERÍA DE GRADO TEXTIL Y PLÁSTICO. SU VISCOSIDAD ES DE 2,0 A 3,45. SU VENTAJA ES BUENA APARIENCIA, BUENA HILADO, ALTA RESISTENCIA Y ALTO RENDIMIENTO DE TINTURA. SE IMPORTA DE EE. UU., JAPÓN, PAÍSES BAJOS, ETC., CON POLIMERIZACIÓN CONTINUA VK, GRANULACIÓN SUBMARINA, SECADO POR FLUJO DE AIRE CONTINUO, CONTROL DCS Y OTRAS TECNOLOGÍAS. EL GRUPO DE TERMINALES AMINO, EL CONTENIDO DEL MONÓMERO Y OTRAS ESPECIFICACIONES SON MEJORES.
POR QUÉ ELEGIRNOS:
1. ESTABLECIMOS EN 1970, CON 50 AÑOS DE EXPERIENCIA EN EL CAMPO PA6.
2. 1600 EMPLEADOS
3. NUESTRA CANTIDAD DE VENTAS EN 2020 ES MÁS DE USD400.00 MILLONES
4. TENEMOS CERTRIFICADOS ISO9000, ISO14001, IATF16949, REACH, ROHS, TFS.
ESPECIFICACIÓN:
NO | ÍT | NORMA | DATOS |
1 | VISCOSIDAD | Q / 321200WLB001—2019 | M ± 0,04 |
2 | CONTENIDO DEL MONÓMERO (%) | Q / 321200WLB001—2019 | ≤ 0 0,6 |
3 | CONTENIDO DE MOSITURA (%) | Q / 321200WLB001—2019 | ≤0.06 |
4 | GRUPOS FINALES DE AMINA (Meg / kg) | Q / 321200WLB001—2019 | 40 ± 3 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.